#Panorama stitcher adjust for parallax pro

depending on your most used focal length. If you have a 10-24mm lens, you will have to do these for 10mm, 12mm, 14mm, etc.You will need to repeat these steps for every focal length that you intend to use.Once set, take note of the markings on your nodal rail and your tripod as it will serve as a guide next time you shoot.If it is difficult to see, you may zoom in using the live view of your camera to make sure that it is all set.If it still moves to the left or right, move the nodal rail backward until the light stand and the building are in line all throughout. To do this, you need to slide your nodal rail back and forth to find the correct location on your nodal rail.It must stay in the same position while panning. The goal is to prevent the light stand from moving to the left or to the right.Pan from left to right and see if the light stand or the vertical object is moving to the left or to the right of the building.Start with the camera on the center of the tripod and the lens sticking out forward.Attach your camera to your tripod and set it to live view.Put a vertical object in front of you such as a light stand and line it up with all the buildings in the background.Find a place where there are a lot of vertical lines such as cityscapes.If you have a leveling base, then it is good as you will have a perfectly level camera. You only need your tripod, gimbal head, and your nodal rail. But if it is not, do not worry as there is a method to determine the nodal point.įinding the nodal point is easy. You may check the lens body to see if the nodal point is marked. They are ideal partners but you may use a nodal rail with other tripod heads. The nodal rail and the gimbal head are not always used together.

This also means that it changes for every lens and focal length that you use. This creates defects in stitching and you will have broken lines in your photograph which is very noticeable in the foreground.īasically, the nodal point is the optical center of the lens. The parallax point is essential when you are shooting with ultrawide lenses that include the foreground because the foreground moves as you turn your camera. The nodal point or the no-parallax point is the ideal rotation point of your camera. To shoot a panorama with a gimbal head and nodal rail, you need to understand the concept behind finding the nodal point first. So how do you use a gimbal head for shooting panoramas? But that is not the only equipment you need.

#Panorama stitcher adjust for parallax pro

Using a gimbal head such as the ProMediaGear Katana Pro makes it easier to shoot panoramas by providing a more consistent shot all throughout. One thing that photographers use to achieve this is by using a gimbal head or a panorama tripod head. It is done by stitching multiple photos together to make it look like it is taken with one shot. Panoramas are interesting images as they show an ultrawide view of a landscape.